Productindex Plastic Protectors

Plastic Protectors      EP 180 Pressure Pipe Uniplugs This specially designed vented uniplug offers protection for both the socket and spigot ends of PVC pressure pipes and are equally adaptable for use on PE pipes.        EP 190 Driveshaft Protection Caps Fit driveshafts with a protruding fitting key. Provide protection and masking of driveshafts as well as the surrounding bearings.        EP 200 Stud Protection Caps With knrulled Edges Used throughout the automotive and engineering industries for protecting exposed studs.        EP 230 Pipe End FlexiPlugs For Steelpipes This unique finned design enables each plug to fit a large range of IDs of every Nominal Pipe Size up to 10 inch OD. Push-Fit design allows easy application of plug to pipes racked on the yard.        EP 240 Recessed Caps for Pipe Ends Accommodate crane hook handling. Protect pipe bevels and internal walls from corrosion and damage. Accept crane hooks for moving pipes during storage, transit and laying. Accommodate crane hook handling.        EP 250 Open Bevel Edge Protectors for Pipe Ends These caps were designed to cradle delicate bevelled edge pipe ends. These durable caps remain securely on the pipe end until intentionally removed.        EP 260 Pipe End Caps The Original One piece construction Injection-moulded Up to 64.” nominal bore size and complemented with over 170 additional sizes. Internal ribs provide tight fit and release pressure build up.        EP 270 Parallel Protection Plugs Low-cost. Popular general-purpose plug. Over 150 sizes to suite a wide range of applications. Available for all sizes of bores, tubes, pipes, flanges and valves.        EP 270 TK Tapered Protection Plugs Expanded! Low-cost. Can be used as either a cap or plug. Easy fitting and removal. New sizes up to 12 inch / 330 mm.        EP 275 High Temperature Tapered Silicone Plugs These Silicone Rubber Plugs have a tapered design for ease in plugging ports and holes in parts undergoing abrasive high temperature processing.. They withstand temperatures up to 600°F / 316°C.        EP 277 High Temperature Silicone Caps These Silicone Rubber Caps are designed to provide complete protection for masking application on parts undergoing abrasive high temperature processing.. They withstand temperatures up to 600°F / 316°C.        EP 280 Tapered Protection Plugs / Caps They are tapered in design and made from highly flexible polyethylene. Ideal for use on MIL Std. and SAE-type tube and hydraulic fittings, and for threaded external and internal NPT and BSP fittings. Low cost.        EP 285 Tapered Plugs / Caps - Large Flange Compliments EP 280 range of caps and plugs. Large flange for greater surface protection and easy removal.        EP 300 Valve Flange Protection Plug These plugs have a tapered body and a wide flange to protect the entire machined surface of valve flange.Provides cushioned protection for flange face. Suitable for DIN 2402 flanges.        EP 303 Valve Flange Protection Plug These plugs have a tapered body and a wide flange to protect the entire machined surface of valve flange. Provides cushioned protection for flange face. Suitable for DIN 2631-2635 flanges.        EP 304 Stud Hole Flange Pro-Tectors Suitable for ASA/ANSI/BS1560 flanges. Quick fitting. Simply insert plugs into the bolt holes.        EP 305 Push-In Flange Protectors The Original These low cost full face flange protectors are the most universal in the market. Flexible fins ensure a tight fit into the center bore.Can be used on a variety of different sized flanges and flange classifications.        EP 310 Outside Fitting Flange Protectors The Original This precise fitting wrap-around protector offers easier handling than any other product in the industry. Its unique style is ideal for coated and conical bore flanges.        EP 320 Round Head Protection Plugs Low-cost, quick fitting plugs suitable for most applications. Convex sides to ensure secure fit.        EP 340 Flat Head Protection Plugs Low-cost, quick fitting plugs suitable for most applications. Convex sides to ensure secure fit.        EP 350 Snap-Fit Grip Plugs Single turn gives tight fit once pushed into position. Designed with flexible fins each plug covers a wide range of threads.        EP 360 Snap-Fit Grip Plugs With large full Protection Flange Single turn gives tight fit once pushed into position. Designed with flexible fins each plug covers a wide range of threads.        EP 370 Thermoplastic Rubber Plugs Durable, rubber-like material Handy pull-tab for easy removal. Protects threaded or plain components. Withstands continuous temperatures of up to 120 ° C.        EP 380 Push-Fit Side Relase Plug with 1 strong Fin Push-Fit for easy instalation. Side Pull Tab is designed for easy removal in awkward locations        EP 385 Push-Fit Side Relase Plug with 2 strong Fins Push-Fit for easy instalation. Side Pull Tab is designed for easy removal in awkward locations.        EP 400 Threaded Protection Plugs Designed to protect BSP and metric fittings and threads from damage and contaminatns. The knurled head and screwdriver slot allow for easy installation and removal        EP 4000 Domestic Radiator Threaded Plugs Flangeless. Specially designed for BSP thread sizes. Withstands temperatures up to + 180°C. Excellent for use with power tool.        EP 434 Threaded Sealing Plugs, PE, red Designed to protect unified / straight threaded ports. Each plug features an integral tight fit sealing lip along with five complete thraeds. Exist in a wide range of metric, Whitworth and UNF thread types.        EP 435 Threaded Sealing Plugs, PA, yellow Designed to protect unified / straight threaded ports. Each plug features an integral tight fit sealing lip along with five complete thraeds. Exist in a wide range of metric, Whitworth and UNF thread types.        EP 436 Threaded Sealing Plugs with Drain Head Designed to protect unified / straight threaded ports. Each plug features an integral tight fit sealing lip along with five complete thraeds. Exist in a wide range of thread types. Head designed to drain leakage. Large flange design.        EP 437 Threaded Sealing Plugs EP 435 with assembled washer EP 435 body design .For particularly high demands on tightness with additional factory-made fitting of an neoprene rubber sealing washer. Exist in a wide range of metric, Whitworth and UNF thread types.        EP 438 Threaded Sealing Plugs EP 436 with assembled washer EP 436 body design .For particularly high demands on tightness with additional factory-made fitting of an neoprene rubber sealing washer. Exist in a wide range of metric, Whitworth and UNF thread types. Head designed to drain leakage. Large flange design        EP 439 Threaded Sealing Plugs EP 435 with assembled O-Ring EP 435 body design .For particularly high demands on tightness with additional factory-made fitting of an neoprene rubber sealing O-Ring. Exist in a wide range of metric, Whitworth and UNF thread types.        EP 440 Threaded Sealing Plugs EP 436 with assembled O-Ring EP 436 body design .For particularly high demands on tightness with additional factory-made fitting of an neoprene rubber sealing O-Ring. Exist in a wide range of metric, Whitworth and UNF thread types. Head designed to drain leakage. Large flange design        EP 445 Threaded Sealing Plugs with Drain Head Designed to protect unified / straight-threaded ports. A cross-slotted head makes it easy to tighten with a screwdriver.        EP 500 Threaded Caps - Flanged Produced in hard polyethylene and designed with an easy to grip head for ease of hand installation. Option -We recommend a factory-made fitting of an internal neoprene rubber sealing disk.        EP 510 Threaded Caps Used throughout the automotive, fluid power and engineering industries. Protects threaded components from dust, moisture and damage during production, storage and transportation.        EP 520 Threaded Sealing Caps Used throughout the automotive, fluid power and engineering industries. Protects threaded components from dust, moisture and damage during production, storage and transportation.        EP 600 Rectangular Inserts - Ribbed Ideal tubing closures as furniture glides. Protects floor surfaces when used as feet. Ribbed for easy assembly and secure fitting.        EP 620 Round Inserts - Ribbed Ideal tubing closures as furniture glides. Protects floor surfaces when used as feet. Ribbed for easy assembly and secure fitting.        EP 700 Square Inserts - Ribbed Ideal tubing closures as furniture glides. Protects floor surfaces when used as feet. Ribbed for easy assembly and secure fitting.        EP 800 Bolt and Nut Protection Caps These caps cover nuts and exposed bolts and provide effective protection against damage and weathering and improve the finished appearance of your product. Easy to fit and to remove.        EP 810 Bolt and Nut Anti-Corrosion Caps Durable snap-on installation With anti-vibration locking lip 175 Designs and Sizes Designed to fit bolts, bolt ends, nuts and screws and developed to provide almost total protection against corrosion, humidity and operational damage.