Productindex Cable Glands Brass,Nickel Plated

Brass Cable Glands      EPN 700 Brass Cable Glands A wide range of high strength compresion type cable glands manufactured in nickel plated brass with eiter PG or metric thread. Protection similar to IP 68 is achieved by employing a fully insulated Neoprene cable seal and Perbunan O-Ring.        EPN 705 EMC Brass Cable Glands This EMC / EMI cable gland is designed to ground cable braids directly to the wall with optimum contact to the periphery of the gland base.        EPN 710 Brass Locknuts flangeless Locknuts are required wherever varnished, anodized and powder coated housings are used.        EPN 715 Brass Lock-Nuts with cutting edges EMC / EMI hexagon shaped lock-nuts with cutting edges provide best possible shield contact. Manufactured in nickel plated brass these specially designed lock-nuts cut through protectice coatings found on enclosures.        EPN 720 Brass Thread Reducers This component reduces the threaded entry diameter on any threaded connector from a larger to smaller thread size to accept a gland. Configuration: from large external Metric to small Metric and from large external PG to small internal PG        EPN 730 Brass Blanking Plugs Nickel plated. This range fits a variety of Metirc and PG thread sizes and can be applied for plugging threads in panels from 12mm to 63mm in diameter.        EPN 740 Brass Thread Enlargers Used for enlarging a tapped hole or for fitting to a panel to accept a gland. Available for both metric to metric and PG to PG. Threads are manufactured in nickel-plated brass.        EPN 750 Brass Thread Adapters M -> PG Nickel plated. From metric external thread up to PG internal thread and from PG external thread up to metric internal thread